Choosing the Correct Sealant

Choosing the Correct Sealant

Identify Failed Sealant Type

  • Properly identify the failed sealant type in order to accurately assess the causes of failure and determine the appropriate restoration sealant.
  • The sealant manufacturer (if known) can assist in identifying the failed sealant type (i.e. silicone, polyurethane, polysulfide, etc.) through laboratory analysis of sealant samples.
  • If the incorrect sealant type was originally installed, ensure the appropriate replacement sealant type is identified prior to reapplication.


Avoid Recurring Failures

  • Choosing the correct replacement sealant is critical when restoring a failed sealant joint in order to avoid recurring sealant failures.
  • Sealant selection will be determined by the type of failure/s experienced on the project i.e. excessive joint movement, incompatibilities, etc.  Existing sealants can also have influence over the choice of the restoration sealant.
    1. Sealants that have failed due to excessive joint movement must be replaced with a sealant that can accommodate the actual joint movement occurring at the project.  A sealant upgrade, with respect to movement class, will be required in these situations.
    2. Sealants that have failed due to early joint movement during sealant cure cycle must be replaced. The repair process involves either selection of a sealant that will perform under adverse conditions of early movement or waiting for extreme conditions to subside before undertaking repairs.
    3. Any sealant/substrate incompatibilities must be clearly identified and the appropriate testing must be conducted in order to determine the correct restoration sealant.
    4. If poor surface preparation or omission of sealant primer has caused the sealant failures, the sealant should be reinstalled per the manufacturer’s surface preparation and priming guidelines.
    5. If the failed sealant has significantly aged and has reached its maximum service life, all affected sealant should be replaced.
    6. If an improper sealant application was identified, the identical or appropriate alternate sealant may be reinstalled provided that the manufacturer’s published installation procedures are strictly followed.

Interior or Exterior Application?

  • Careful consideration and review of manufacturer’s data sheets should be performed in order to determine proper sealant for application.

Joint Extension and Compression - completeSealant Movement Capabilities    

  • A sealant’s designed movement capabilities (extension/ compression) are typically published in the manufacturer’s product literature.
  • Be sure to choose a sealant that will accommodate the anticipated joint movement occurring at the project.

Color and Paintability

    • Sealant color may or may not be vital to the project owner.  Be sure to select a sealant that is available in the color choice required for the project.
    • Most sealants are paintable with the exception of silicone based sealants.  If the sealant is to be painted, be sure to choose the correct sealant and compatible paint finish. Consult the manufacturer for required sealant cure times prior to painting.

 Refer to Pecora Technical Bulletin #31 Painting Over Sealants  for more information.  

Click here for the next page
Click here to return to the Joint Restoration Guide

Distributor/Sales Rep Locator

Sales Rep

Technical Services

Let our tech service experts help make your project a success.

Click or call (800) 523-6688.

Pecora Calculator

Calculate material needs for Coatings, Sealants and Air Barriers.

Launch Calculator

Pecora Calculator
Air Barrier
Enter Data:
Select Product

Required Dry Mil Coverage (mils)

Total Sq. Ft. Of Project

Estimated Waste (%):
Coverage Rate(Wet):
Sq. Ft./Gallon


Materials Required

To use: Enter values and press "Update" to recalculate. These calculators also update when you tab to the next field or click elsewhere in the page.